Telescope/Mount Drivers
EQ-3 for Android to put your heating in your pocket. EQ-3 app you can control your heating from anywhere. EQDrive Upgrade Kit EQ3 for upgrading the Sky Watcher EQ3, Celestron CG4 mounts. This set will transform your mount into a computerized complex with GOTO, will allow you not only to comfortably observe but also to begin your first steps in astrophotography.
ACL Telescope Controllers (6.0.1)
Installs a driver for telescope control systems that speak the Merlin Controls Astronomy Command Language. Please note that there is a specific driver for the COMSOFT PC-TCS control system below. Version 6.0.1 corrects a COM port setup bug, and has sources for building under Platform 6.Advanced LX-200 Driver (Generic, not for Meade scopes)
Installs a driver that uses a subset of the LX-200 protocol. Use this driver with mounts that purport to use the LX-200 protocol like FS2, Picastro etc...Ascom 2X Mount Adaptor (Paramount, etc., 6.1) for TheSky X and TheSky 5/6 (external link)
This is supplied by Software Bisque and is available from the Downloads section of the Software Bisque site, the file is called Ascom 2X Mount Adaptor Setup.exe
Installs a driver that connects to Software Bisque's TheSky X/6/5 Astronomy Software and makes it look like a standard ASCOM telescope. This allows ASCOM-based astronomy software to use TheSky (including TPOINT and ProTrack) as a smart telescope controller. For more information see Working with TheSky (section 1). It is required for the Paramount mounts, and may be used with TheSky controlling any other of its supported telescope types, or via its built-in outbound ASCOM support, and then using ASCOM telescope drivers. This driver provides Telescope V3 support, 100% conformance, and compatibility with TheSky X (10.2.0 or later). It should also work with TheSky6 and TheSky5 but not all functionality will be present.
Astro-Physics GTO - Factory Supplied Driver and Software
This is the installer for the Astro-Physics factory-supported driver for all Astro-Physics telescope models. Please go to the Astro-Physics Driver web page for their driver and associated software.AstroShop Omegon EQ500X Equatorial Mounts
This is the installer for the Omegon Mount EQ-500X sold by Astroshop.eu. Omegon mounts are a collection of Alt-Az and Equatorial mounts for visual observation and astrophotography. The Conformance report is part of the release. The mounts and driver pass with two errors related to coordinates granularity (1 arcsec minimum).Celestron Unified (6.1.7350, Feb 2020) Telescope & Focuser
Installs a driver for all computerized Celestron telescopes, now including the new Celestron Focuser. NOTE: Focuser moves are prevented if the focuser is not calibrated. Calibrate the Focuser before anything else! Also this driver does its best to compensate for the extra time needed for final approach in slews but which is not reported via the Celestron controller. This driver has passed the Conformance Checker tests. See the help file and release notes(!), installed as part of the driver, for a full description.
Eq-3 Driver Download
This driver does NOT support Synta mounts. Use the Sky-Watcher drivers listed below.
Digital Setting Circles (David Ek, external link)
This ASCOM driver allows the use of a variety of commercial and homebrew passive encoder-based digital setting circles systems with any Windows software that supports the ASCOM standard. This driver works with either alt-az mounts (like a dobsonian) or equatorial mounts. Equatorial mounts do not need to be accurately polar-aligned (although an accurate polar alignment will likely lead to a more satisfying observing experience). The button leads to David's web site for this driver as well as other info on DSCs.Explore Scientific PMC-Eight Mount Controller Driver
This is the link for the PMC-Eight Mount Controller to download the PMC-Eight Software Development Kit. This kit includes the ASCOM-Standards driver and other information needed to develop applications for the controller. This version of the driver has passed the Conformance Checker (report included in SDK). Please contact Explore Scientific for more information.EQMOD Project (external link)
With the EQMOD ASCOM driver, the user will be able to control the Modded EQ mount using any ASCOM based astronomy software at 0.144 arcsecond resolution. This is an ongoing project, so be sure to check the site for updates.
Gemini Telescope .NET (1.0.75, April 2020)
Installs a driver for mounts controlled by René Görlich's Gemini Astronomical Telescope Positioning System. This latest version (2020) addresses compatibility with ASCOM Alpaca and also makes some needed changes for soon to be released firmware (stay tuned for this upcoming firmware release). Current firmware required!Generic LX-200 (5.0.1)
Installs a driver that uses a small subset of the LX-200 protocol. Features are limited, and end-of-slew detection may be unreliable (requires adjustment of encoder resolution). Use this driver with mounts that purport to use the LX-200 protocol. Be prepared for limitations and problems. Simple applications (such as planetarium slewing) are more likely to work than demanding automation applications.Download Eq For Pc
GS Server (July 2020) for Sky-Watcher and Orion Mounts
This is a server with its own graphical interface that provides an ASCOM Telescope interface as well as a Synta Protocol for Sky-Watcher and Orion mounts: EQ8, EQ8-R, HDX110, AZ-EQ5GT, Sirius Pro AZ/EQ-G, AZ-EQ6GT, Orion Atlas Pro AZ/EQ-G, EQ6-R PRO, NEQ6, HEQ5, EQ5, EQ4, AzGTi.iOptron CEM60 and iEQ45 Pro
Installs a driver for the iOptron CEM60 and iEQ45 Pro mounts. This driver has been supplied by the manufacturer and has passed all conformance tests (report here).LittleFoot Controller (1.0.0)
Driver for the LittleFoot Controller Project, specifically the LittleFoot Classic. For more info see Astronomie & Elektronik (a German/English forum).Meade Autostar/Audiostar Project (October 2019)
Link to a new 'Meade Generic' driver for the Meade Autostar/Audiostar controlled Meade telescopes. This driver project is listed in hopes that the author can get feedback and work out any remaining issues. This driver has been created after discovering that the 'Meade LX200 Classic and Autostar #494, #495, and #497 (combined telescope/focuser, 5.0.4)' driver listed below does not implement enough features to allow the telescope to be properly operated remotely.The driver can be installed alongside any other driver (including the 'universal' one listed below). See the driver project website for details. Please provide feedback to the developer or via the ASCOM Talk User's List.Meade Universal Driver Project (June 2014)
Link to a driver that recognizes new Meade telescopes (LX850 and LX600), some earlier LX200GPS telescopes, and telescopes that recognize basic Meade Commands (e.g., LX200 Classic, Centurion). Provides position readout, slews, side of pier (where appropriate), and pulse guiding among its basic capabilities. It has passed Conformance Checking for the LX850 and the LX600 and has been run with a number of other Meade telescopes. While not complete functionality (e.g., missing tracking control, focus control, slew rate selection), this is the first iteration of a driver that is intended provide replacement capabilities for all existing Meade drivers. Please Note: This driver reports that it cannot control tracking (on/off) so it may not be suitable for automation applications.
Meade LX200 Classic and Autostar #494, #495, and #497 (combined telescope/focuser, 5.0.4, May 2013)
Installs a driver for the original Meade LX200 ('classic') telescope mounts (including the 16'), as well as Meade telescopes that use the Autostar I (#494, #495 and #497) controllers, such as the ETX and DS series. This driver provides both telescope and focuser interfaces each of which may be used by separate programs. Do not use this with the LX200GPS, LX200R or the RCX400. V5.0.4 corrects installer and driver version mismatches only, no logic in the driver has changed since 2008.Meade LX200GPS and LX200R (combined telescope/focuser, 5.0.0, Jan 2008)
Installs a driver for the Meade LX200GPS and LX200R telescope mounts. This driver provides both telescope and focuser interfaces each of which may be used by separate programs. Do not use this with the LX200 Classic or the Autostar I (#495/#497) controllers. It has been reported that this driver also works with the RCX400 except it doesn't allow access to its unique features.Meade MaxMount (1.0.0, March 2012)
Installs a driver for the Meade MaxMount and MAX 20' ACF telescope mount.PC-TCS (combined telescope/focuser/dome 5.0.1)
Installs a driver for the COMSOFT PC-TCS telescope control systems. This driver provides combined telescope, focuser, and dome interfaces each of which may be used by separate programs.ServoCAT (5.2.1, external link)
Driver for the StellarCAT ServoCAT telescope control system. Latest firmware is recommended but will run with old firmware (backwards compatible) with reduced features. The author provides a self-contained installer.
Sky Commander (2.1.0, external link)
Driver for the Sky Commander digital setting circle (DSC) device. The author provides a self-contained installer.Sky-Watcher SynScan Physical Hand Controller and SynScan App (separate drivers)
These drivers is for all mounts that use the Synta Sky-Watcher SynScan controller, including those provided by Orion etc. It should work with both AltAz and GEM mounts. The SynScan Hand Controller V3/V4 version must be 3.38 or 4.38 or later to get full functionality but limited functionality should be available for all HC versions. In addition a separate driver is available for the SynScan App, a virtual version of the Sky-Watcher SynScan hand controller.Takahashi Temma (5.0.26, external link)
Driver for the Takahashi Temma mounts. This is a full-featured driver that provides not only ASCOM standard driver functions, but also user access to many of the Temma's special features.Vixen SkySensor 2000 (6.1.7)
Installs a driver for the Vixen SkySensor 2000 telescope control system. This version corrects the installer so it can be installed on Platform 5 and 6 (and later). The driver has also passed the Conformance Checker tests (see this report). NOTE: This driver provides limited support for the IDEA GoToStar system.Vixen Sphinx (external link)
Driver for the Vixen Sphinx mounts.Focuser Drivers
Airy Focuser Drive
Driver for the Airy Focuser Drive. Compatible with William Optics 3.3' Focuser, Takahashi FSQ-106, and Feather Touch 2.5' and 3' Focusers. Link to download ASCOM driver is at the bottom of this page.Astro-Physics GTO (4.1.25, combined telescope/focuser driver)
Updated 10-Sep-2008 to correct the installer (it now registers this driver's Focuser as well as its Telescope), no changes to driver itself. Installs a driver for the Astro-Physics series of telescope mounts.Celestron Unified (6.1.7350, Feb 2020) Telescope & Focuser
Installs a driver for all computerized Celestron telescopes, now including the new Celestron Focuser. NOTE: Focuser moves are prevented if the focuser is not calibrated. Calibrate the Focuser before anything else! Also this driver does its best to compensate for the extra time needed for final approach in slews but which is not reported via the Celestron controller. This driver has passed the Conformance Checker tests. See the help file and release notes(!), installed as part of the driver, for a full description.
This driver does NOT support Synta mounts. Use the SkyWatcher driver listed in the Telesope Drivers section.
LakesideAstro Motor Focus System
Driver for the LakesideAstro Motor Focus System. This driver and controller were tested with the ASCOM Driver Conformance tool. Here are the passing results.Lunatico's Seletek Focuser
Software and drivers for the Seletek family of controllers. Separate ASCOM drivers are supplied for up to three simultaneous devices (focuser, rotator, dome...).Meade LX200 Classic and Autostar I (combined telescope/focuser, 5.0.4)
Installs a driver for the original Meade LX200 ('classic') telescope mounts (including the 16'), as well as Meade telescopes that use the Autostar I (#495 and #497) controllers, such as the ETX and DS series. This driver provides both telescope and focuser interfaces each of which may be used by separate programs. Do not use this with the LX200GPS, LX200R or the RCX400. V5.0.4 corrects installer and driver version mismatches only, no logic in the driver has changed since 2008.Meade LX200GPS and LX200R (combined telescope/focuser, 5.0.0)
Installs a driver for the Meade LX200GPS and LX200R telescope mounts. This driver provides both telescope and focuser interfaces each of which may be used by separate programs. Do not use this with the LX200 Classic or the Autostar I (#495/#497) controllers. It has been reported that this driver also works with the RCX400 except it doesn't allow access to its unique features.MFOC Lacerta Motor Focus
Drivers for the MFOC Lacerta Motor Focusers from Telescop-Austria.Micro Focuser (all models)
Drivers for all models of the Micro Focuser line of precision focusers.MoonLite Focuser (also handles the Lacey EasyFocus and LazyFocus units)
Driver for James Lacy's MoonLite focuser. This driver is also supposed to work with the old James Lacy EasyFocus and Lazy Focus units. Caution: the download page prominently features a standalone (non-driver) focuser control program; the 32- and 64-bit ASCOM drivers are listed second and third.Pegasus Astro Dual Motor Focus Driver
Driver for the Pegasus Astro Dual Motor Focus controller. Link to download the driver can be found at the bottom of the page you see when you click the Visit button.Optec TCF-S Focuser Drivers
The button takes you to the Optec, Inc. download page for their drivers. Optec supplies and supports ASCOM drivers for their devices.PC-TCS (combined telescope/focuser/dome 5.0.1)
Installs a driver for the COMSOFT PC-TCS telescope control systems. This driver provides combined telescope, focuser, and dome interfaces each of which may be used by separate programs.Eq-3 Driver Download Torrent
RoboFocus (3.0.9)
Installs a basic driver for the Technical Innovations RoboFocus focuser. Use this for most applications. The 3.0.9 update adds support for serial ports through COM32.Eq-3 Driver Download Mac
RoboFocus Control Program (5.2.0a)
Installs a combined control program and driver for the Technical Innovations RoboFocus focuser. This is an updated RoboFocus Control Program with a built-in ASCOM driver. This driver has the ability to create several drivers giving the ability to control multiple focusers on the same system. Unless you need this full-function program or the multiple drivers, use the basic driver listed above. Most programs such as MaxIm DL already have the needed focus controls built in. 5.0.2a corrects an uninstall problem if all three instances are not selected)SmartFocus Focuser (4.0.1)
Installs a driver for the JMI SmartFocus focuser.Trinamic TMCM-1110 Focuser
Trinamic TMCM-1110 module - Driver for the Trinamic TMCM-1110 stepper motor controller/driver module. Includes support for modules that use the Trinamic Motion Control Language TMCL.